Audi Q5   Controls   Instruments and warning/indicator lamps  Instruments
Overview of instrument cluster
Fig. 1 Overview of instrument cluster
The coolant temperature gauge -1- Fig. 1 only works when the ignition is switched on. In order to avoid possible damage to the engine, please read the following notes for the different temperature ranges.
Engine cold
If the needle is still in the lower range of the dial, this indicates that the engine has not yet reached operating temperature. Avoid high engine speeds, full acceleration and heavy engine loads.
Normal temperature
In normal operation the needle will settle somewhere in the centre of the dial once the engine has reached operating temperature. The needle may also go further up when the engine is working hard at high outside temperatures. This is no cause for concern, provided the warning lamp does not light up in the instrument cluster.
If the needle is over to the far right on the dial, this means the coolant temperature is too high. In addition, the warning lamp Link will light up.
WARNING!
  • Before opening the bonnet and checking the coolant level, please observe the warning information on Link.
  • Never open the bonnet if you can see or hear steam or coolant escaping from the engine compartment; there is a risk of being scalded. Wait until you can no longer see or hear escaping steam or coolant.
Caution!
  • Additional lights and other accessories in front of the air inlet reduce the cooling effect of the radiator. At high outside temperatures and high engine loads, there is a risk of the engine overheating.
  • The front spoiler also ensures proper distribution of the cooling air when the vehicle is moving. If the spoiler is damaged this can reduce the cooling effect, which could cause the engine to overheat. You should obtain professional assistance.